dmesg - Intel Core i7 3960X
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000c82f7000 (usable)
BIOS-e820: 00000000c82f7000 - 00000000c83ef000 (ACPI NVS)
BIOS-e820: 00000000c83ef000 - 00000000c884d000 (usable)
BIOS-e820: 00000000c884d000 - 00000000c894d000 (ACPI NVS)
BIOS-e820: 00000000c894d000 - 00000000cb699000 (usable)
BIOS-e820: 00000000cb699000 - 00000000cb6bf000 (reserved)
BIOS-e820: 00000000cb6bf000 - 00000000cb71b000 (usable)
BIOS-e820: 00000000cb71b000 - 00000000cb7bf000 (ACPI NVS)
BIOS-e820: 00000000cb7bf000 - 00000000cb7e0000 (usable)
BIOS-e820: 00000000cb7e0000 - 00000000cb7f2000 (ACPI data)
BIOS-e820: 00000000cb7f2000 - 00000000cb7f3000 (usable)
BIOS-e820: 00000000cb7f3000 - 00000000cb7ff000 (ACPI data)
BIOS-e820: 00000000cb7ff000 - 00000000cb800000 (usable)
BIOS-e820: 00000000cb800000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: /DX79SI, BIOS SIX7910J.86A.0281.2011.1019.1612 10/19/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000CC000000 mask 3FFFFC000000 uncachable
1 base 0000D0000000 mask 3FFFF0000000 uncachable
2 base 0000E0000000 mask 3FFFF0000000 uncachable
3 base 0000F0000000 mask 3FFFF8000000 uncachable
4 base 0000F8000000 mask 3FFFFC000000 uncachable
5 base 0000FC000000 mask 3FFFFE000000 uncachable
6 base 0000FE000000 mask 3FFFFF000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcb800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000008a000] 8a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cb800000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cb800000 page 2M
kernel direct mapping tables up to cb800000 @ 1fffe000-20000000
init_memory_mapping: 0000000100000000-0000000430000000
0100000000 - 0400000000 page 1G
0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ cb7de000-cb7e0000
RAMDISK: 364e6000 - 3726b000
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cb7fd120 0005C (v01 INTEL DX79SI 00000119 01000013)
ACPI: FACP 00000000cb7fc000 000F4 (v03 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: DSDT 00000000cb7f7000 04F61 (v02 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: FACS 00000000cb725000 00040
ACPI: APIC 00000000cb7f6000 00138 (v02 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: MCFG 00000000cb7f5000 0003C (v01 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: ASF! 00000000cb7f4000 000A5 (v32 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: HPET 00000000cb7f3000 00038 (v01 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: ASPT 00000000cb7f1000 00034 (v07 INTEL DX79SI 00000119 MSFT 0100000D)
ACPI: SSDT 00000000cb7e1000 0F054 (v01 INTEL SSDT PM 00000119 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000430000000
Initmem setup node 0 0000000000000000-0000000430000000
NODE_DATA [000000042fffb000 - 000000042fffffff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[9] active PFN ranges
0: 0x00000010 -> 0x0000008f
0: 0x00000100 -> 0x000c82f7
0: 0x000c83ef -> 0x000c884d
0: 0x000c894d -> 0x000cb699
0: 0x000cb6bf -> 0x000cb71b
0: 0x000cb7bf -> 0x000cb7e0
0: 0x000cb7f2 -> 0x000cb7f3
0: 0x000cb7ff -> 0x000cb800
0: 0x00100000 -> 0x00430000
On node 0 totalpages: 4175007
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3898 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 812384 pages, LIFO batch:31
Normal zone: 52224 pages used for memmap
Normal zone: 3290112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 16 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000c82f7000 - 00000000c83ef000
PM: Registered nosave memory: 00000000c884d000 - 00000000c894d000
PM: Registered nosave memory: 00000000cb699000 - 00000000cb6bf000
PM: Registered nosave memory: 00000000cb71b000 - 00000000cb7bf000
PM: Registered nosave memory: 00000000cb7e0000 - 00000000cb7f2000
PM: Registered nosave memory: 00000000cb7f3000 - 00000000cb7ff000
PM: Registered nosave memory: 00000000cb800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88042fc00000 s83072 r8192 d23424 u131072
pcpu-alloc: s83072 r8192 d23424 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106394
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16340364k/17563648k available (6566k kernel code, 863620k absent, 359664k reserved, 6637k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1216 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3200.119 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.23 BogoMIPS (lpj=12800476)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
x2apic not enabled, IRQ remapping init failed
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3960X CPU @ 3.30GHz stepping 06
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 8a000
TSC synchronization [CPU#0 -> CPU#1]:
Measured 396273050 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#4
smpboot cpu 4: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#5
smpboot cpu 5: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#8
smpboot cpu 8: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#9
smpboot cpu 9: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#10
smpboot cpu 10: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
#11
smpboot cpu 11: start_ip = 8a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 12 CPUs
Total of 12 processors activated (76800.81 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at c82f7000 (1015808 bytes)
PM: Registering ACPI NVS region at c884d000 (1048576 bytes)
PM: Registering ACPI NVS region at cb71b000 (671744 bytes)
print_constraints: dummy:
RTC time: 14:29:04, date: 04/13/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xefffffff]
pci 0000:00:00.0: [8086:3c00] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3c02] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: [8086:3c03] type 1 class 0x000604
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: [8086:3c04] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [8086:3c08] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: [8086:3c28] type 0 class 0x000880
pci 0000:00:05.2: [8086:3c2a] type 0 class 0x000880
pci 0000:00:05.4: [8086:3c2c] type 0 class 0x000800
pci 0000:00:05.4: reg 10: [mem 0xe0426000-0xe0426fff]
pci 0000:00:11.0: [8086:1d3e] type 1 class 0x000604
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: [8086:1d3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xe0428100-0xe042810f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xe0400000-0xe041ffff]
pci 0000:00:19.0: reg 14: [mem 0xe0425000-0xe0425fff]
pci 0000:00:19.0: reg 18: [io 0x4040-0x405f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1d2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xe0427c00-0xe0427fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1d20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xe0420000-0xe0423fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1d10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:1d14] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:1d16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: [8086:1d1a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:1d26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xe0427800-0xe0427bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:1d41] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1d02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x4068-0x406f]
pci 0000:00:1f.2: reg 14: [io 0x4074-0x4077]
pci 0000:00:1f.2: reg 18: [io 0x4060-0x4067]
pci 0000:00:1f.2: reg 1c: [io 0x4070-0x4073]
pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 24: [mem 0xe0427000-0xe04277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1d22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xe0428000-0xe04280ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xe0300000-0xe0301fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:03:00.0: [1002:679a] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xe0200000-0xe023ffff 64bit]
pci 0000:03:00.0: reg 20: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: [1002:aaa0] type 0 class 0x000403
pci 0000:03:00.1: reg 10: [mem 0xe0240000-0xe0243fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:07:00.0: [1106:3403] type 0 class 0x000c00
pci 0000:07:00.0: reg 10: [mem 0xe0100000-0xe01007ff 64bit]
pci 0000:07:00.0: reg 18: [io 0x2000-0x20ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xe0100000-0xe01fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:09:00.0: [8086:10d3] type 0 class 0x000200
pci 0000:09:00.0: reg 10: [mem 0xe0000000-0xe001ffff]
pci 0000:09:00.0: reg 18: [io 0x1000-0x101f]
pci 0000:09:00.0: reg 1c: [mem 0xe0020000-0xe0023fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EVRP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.JEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.JEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
pci 0000:3f:08.0: [8086:3c80] type 0 class 0x000880
pci 0000:3f:09.0: [8086:3c90] type 0 class 0x000880
pci 0000:3f:0a.0: [8086:3cc0] type 0 class 0x000880
pci 0000:3f:0a.1: [8086:3cc1] type 0 class 0x000880
pci 0000:3f:0a.2: [8086:3cc2] type 0 class 0x000880
pci 0000:3f:0a.3: [8086:3cd0] type 0 class 0x000880
pci 0000:3f:0b.0: [8086:3ce0] type 0 class 0x000880
pci 0000:3f:0b.3: [8086:3ce3] type 0 class 0x000880
pci 0000:3f:0c.0: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.1: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.2: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0c.6: [8086:3cf4] type 0 class 0x000880
pci 0000:3f:0c.7: [8086:3cf6] type 0 class 0x000880
pci 0000:3f:0d.0: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.1: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.2: [8086:3ce8] type 0 class 0x000880
pci 0000:3f:0d.6: [8086:3cf5] type 0 class 0x000880
pci 0000:3f:0e.0: [8086:3ca0] type 0 class 0x000880
pci 0000:3f:0e.1: [8086:3c46] type 0 class 0x001101
pci 0000:3f:0f.0: [8086:3ca8] type 0 class 0x000880
pci 0000:3f:0f.1: [8086:3c71] type 0 class 0x000880
pci 0000:3f:0f.2: [8086:3caa] type 0 class 0x000880
pci 0000:3f:0f.3: [8086:3cab] type 0 class 0x000880
pci 0000:3f:0f.4: [8086:3cac] type 0 class 0x000880
pci 0000:3f:0f.5: [8086:3cad] type 0 class 0x000880
pci 0000:3f:0f.6: [8086:3cae] type 0 class 0x000880
pci 0000:3f:10.0: [8086:3cb0] type 0 class 0x000880
pci 0000:3f:10.1: [8086:3cb1] type 0 class 0x000880
pci 0000:3f:10.2: [8086:3cb2] type 0 class 0x000880
pci 0000:3f:10.3: [8086:3cb3] type 0 class 0x000880
pci 0000:3f:10.4: [8086:3cb4] type 0 class 0x000880
pci 0000:3f:10.5: [8086:3cb5] type 0 class 0x000880
pci 0000:3f:10.6: [8086:3cb6] type 0 class 0x000880
pci 0000:3f:10.7: [8086:3cb7] type 0 class 0x000880
pci 0000:3f:11.0: [8086:3cb8] type 0 class 0x000880
pci 0000:3f:13.0: [8086:3ce4] type 0 class 0x000880
pci 0000:3f:13.1: [8086:3c43] type 0 class 0x001101
pci 0000:3f:13.4: [8086:3ce6] type 0 class 0x001101
pci 0000:3f:13.5: [8086:3c44] type 0 class 0x001101
pci 0000:3f:13.6: [8086:3c45] type 0 class 0x000880
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000008f000 - 000000000008ffff
reserve RAM buffer: 00000000c82f7000 - 00000000cbffffff
reserve RAM buffer: 00000000c884d000 - 00000000cbffffff
reserve RAM buffer: 00000000cb699000 - 00000000cbffffff
reserve RAM buffer: 00000000cb71b000 - 00000000cbffffff
reserve RAM buffer: 00000000cb7e0000 - 00000000cbffffff
reserve RAM buffer: 00000000cb7f3000 - 00000000cbffffff
reserve RAM buffer: 00000000cb800000 - 00000000cbffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xd0000000-0xefffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf0000000-0x107ffffff]
pnp 00:01: [mem 0xf8000000-0xffffffff]
system 00:01: [mem 0xf0000000-0x107ffffff] could not be reserved
system 00:01: [mem 0xf8000000-0xffffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [io 0x0074-0x0077]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [io 0x0400-0x0453]
pnp 00:07: [io 0x0458-0x047f]
pnp 00:07: [io 0x0092]
pnp 00:07: [io 0x0062]
pnp 00:07: [io 0x0066]
pnp 00:07: [io 0x0680-0x06ff]
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0072-0x0073]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [io 0x0400-0x0453] has been reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x0680-0x06ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfec00000-0xfec000ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0a: [mem 0xfed00000-0xfed03fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xe0260000-0xe027ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: PCI bridge to [bus 07-07]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xe0100000-0xe01fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:02: resource 1 [mem 0xe0300000-0xe03fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xe0200000-0xe02fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xe0100000-0xe01fffff]
pci_bus 0000:09: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:09: resource 1 [mem 0xe0000000-0xe00fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 1 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:02:00.0: PCI INT A disabled
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800c42f7000 - ffff8800c82f7000
software IO TLB at phys 0xc42f7000 - 0xc82f7000
audit: initializing netlink socket (disabled)
type=2000 audit(1334327344.240:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 31914
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
pcieport 0000:00:01.1: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 68 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:11.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
Freeing initrd memory: 13844k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 69 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x20 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xe0427000 port 0xe0427380 irq 69
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe0427c00
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xe0427800
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:02:00.0: irq 16, io mem 0xe0300000
xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 77 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:374:485
rtc_cmos 00:03: setting system clock to 2012-04-13 14:29:05 UTC (1334327345)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.06 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 5:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[134]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 78 for MSI/MSI-X
firewire_ohci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
firewire_ohci 0000:07:00.0: setting latency timer to 64
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci_hcd
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:5a:29:44
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:09:00.0: Disabling ASPM L0s
e1000e 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:09:00.0: setting latency timer to 64
e1000e 0000:09:00.0: irq 79 for MSI/MSI-X
e1000e 0000:09:00.0: irq 80 for MSI/MSI-X
e1000e 0000:09:00.0: irq 81 for MSI/MSI-X
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new full-speed USB device number 3 using ehci_hcd
e1000e 0000:09:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 38:60:77:5a:29:45
e1000e 0000:09:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
firewire_core: created device fw0: GUID e0cb4e000004db61, S400
usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
hub 1-1:1.0: unable to enumerate USB device on port 4
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[491]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 82 for MSI/MSI-X
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
EDAC MC: Ver: 2.1.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
generic-usb 0003:0566:3015.0001: input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:00:1a.0-1.2/input0
generic-usb: probe of 0003:0566:3015.0002 failed with error -22
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
[fglrx] Maximum main memory to use for locked dma buffers: 15601 MBytes.
[fglrx] vendor: 1002 device: 679a count: 1
[fglrx] ioport: bar 4, base 0x3000, size: 0x100
pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:03:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 83 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
udevd[529]: renamed network interface eth0 to rename2
udevd[525]: renamed network interface eth1 to eth2
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:03:00.1: irq 84 for MSI/MSI-X
snd_hda_intel 0000:03:00.1: setting latency timer to 64
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.3: Detected FT232RL
usb 1-1.3: Number of endpoints 2
usb 1-1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.3: Setting MaxPacketSize 64
usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
udevd[529]: renamed network interface rename2 to eth1
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
hda-codec: out of range cmd 0:0:5f90:707:0
hda-codec: out of range cmd 0:0:5f90:708:85
hda-codec: out of range cmd 0:0:5f90:f00:c
hda-codec: out of range cmd 0:0:5f90:709:0
hda-codec: out of range cmd 0:0:5f90:f09:0
hda-codec: out of range cmd 0:0:e0:f0d:0
HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=24464 Presence_Detect=1 ELD_Valid=1
hda-codec: out of range cmd 0:0:5f90:f2e:8
hda_codec: cannot build controls for #0 (error -16)
hda_codec: cannot revert codec
snd_hda_intel 0000:03:00.1: PCI INT B disabled
snd_hda_intel: probe of 0000:03:00.1 failed with error -16
usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
generic-usb 0003:1532:0101.0003: input,hidraw1: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-1.4/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input9
generic-usb 0003:1532:0101.0004: input,hidraw2: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-1.4/input1
Adding 16720080k swap on /dev/sda3. Priority:-1 extents:1 across:16720080k SS
type=1400 audit(1334327359.055:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
type=1400 audit(1334327359.055:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=758 comm="apparmor_parser"
type=1400 audit(1334327359.055:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=748 comm="apparmor_parser"
type=1400 audit(1334327359.055:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
type=1400 audit(1334327359.055:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=758 comm="apparmor_parser"
type=1400 audit(1334327359.055:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=748 comm="apparmor_parser"
type=1400 audit(1334327359.055:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
type=1400 audit(1334327359.055:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=758 comm="apparmor_parser"
type=1400 audit(1334327359.055:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=748 comm="apparmor_parser"
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90007000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
init: failsafe main process (879) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1334327363.023:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=977 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
e1000e 0000:00:19.0: irq 78 for MSI/MSI-X
e1000e 0000:00:19.0: irq 78 for MSI/MSI-X
fglrx_pci 0000:03:00.0: irq 84 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
[fglrx] Firegl kernel thread PID: 1381
[fglrx] Firegl kernel thread PID: 1382
ADDRCONF(NETDEV_UP): eth1: link is not ready
[fglrx] Firegl kernel thread PID: 1383
[fglrx] IRQ 84 Enabled
ADDRCONF(NETDEV_UP): eth2: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
do_trap: 54 callbacks suppressed
postgres[26968] trap invalid opcode ip:740b20 sp:7fffd27f7ed8 error:0 in postgres[400000+4ec000]
postgres[26983] trap invalid opcode ip:740b20 sp:7fff30d18a68 error:0 in postgres[400000+4ec000]
postgres[26998] trap invalid opcode ip:740b20 sp:7fff8622b328 error:0 in postgres[400000+4ec000]
nginx[27009] trap invalid opcode ip:408eb9 sp:7fff6734b428 error:0 in nginx[400000+76000]
nginx[27023] trap invalid opcode ip:408eb9 sp:7fff951f5058 error:0 in nginx[400000+76000]
ab[27041] trap invalid opcode ip:4041b7 sp:7fff93c13b40 error:0 in ab[400000+9000]
ab[27143] trap invalid opcode ip:4041b7 sp:7fff211a5da0 error:0 in ab[400000+9000]
ab[27243] trap invalid opcode ip:4041b7 sp:7fff7aca73a0 error:0 in ab[400000+9000]